home *** CD-ROM | disk | FTP | other *** search
- Path: newsfeed.tip.net!usenet
- From: daniel@dalnet.se (Daniel Nyberg)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: CV64 Interlaced Problems
- Date: 18 Feb 96 02:38:46 GMT
- Organization: Uniplus Internet Access
- Message-ID: <1044.6622T208T1811@dalnet.se>
- References: <4eu8r0$oag@newsstand.cit.cornell.edu>
- NNTP-Posting-Host: flash.dalnet.se
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
-
-
- Benjamin Kenobi (fkrj@crux4.cit.cornell.edu) wrote:
- >One question (I think I remember this being discussed lately). I have
- >a CV64 and 1942 monitor :-( I can get resolutions above 800*600 with
- >interlace amazingly enough, but when I go above 8-bit on these modes, the
- >display is trashed. That is, an 8-bit 1024*768 works fine interlaced,
- >but go to a 16 or 24-bit mode and the screen gets messed up. Is this
- >a hardware or software problem, and does it also apply to the non-interlaced
- >versions of these modes?
-
- I also have this problem. 16/24-bit modes works in NI, but displays trash in
- interlaced. 8-bit modes works fine both noninterlaced and interlaced.
-
- I've been looking for an answer to this for a very long time. No luck yet. :(
-
- --
- ----------------------------------/\--------------------------------------
- Daniel Nyberg, daniel@dalnet.se / \ "42 will do." Douglas Adams
- IRC: MrDaniel \ / "Press any key!", The Deathbed Vigil
- ----------------------------------\/--------------------------------------
-
-